 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET PHOTOCOUPLER PS2511-1,-2,-4, PS2511L-1,-2,-4 HIGH ISOLATION VOLTAGE STANDARD MULTI PHOTOCOUPLER SERIES SINGLE TRANSISTOR TYPE DESCRIPTION The PS2511-1, -2, -4 and PS2511L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2511-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2511L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. -NEPOC TM Series- FEATURES * High isolation voltage (BV = 5 000 Vr.m.s.) * High current transfer ratio (CTR = 200 % TYP.) * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) * Taping Product number : PS2511L-1-E3, E4, F3, F4, PS2511L-2-E3, E4 * UL approved : File No. E72422 (S) APPLICATIONS * Power supply * Telephone/FAX. * FA/OA equipment * Programmable logic controller The information in this document is subject to change without notice. Document No. P12975EJ1V0DS00 (1st edition) Date Published October 1998 NS CP(K) Printed in Japan (c) 1997 PS2511-1,-2,-4, PS2511L-1,-2,-4 PACKAGE DIMENSIONS (in millimeters) DIP (Dual In-line Package) PS2511-1 TOP VIEW 43 PS2511-4 TOP VIEW 16 15 14 13 1211 10 9 4.6 0.35 1. 2. 3. 4. 12 Anode Cathode Emitter Collector 20.3 MAX. 12345678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9,11,13,15. Emitter 10,12,14,16. Collector 6.5 7.62 3.8 MAX. 2.8 4.55 MIN. MAX. 2.8 4.55 MIN. MAX. 3.8 MAX. 6.5 7.62 0.65 0.65 1.250.15 2.54 0.50 0.10 0.25 M 0 to 15 1.250.15 2.54 0.50 0.10 0.25 M 0 to 15 PS2511-1 5.1 MAX. TOP VIEW 43 PS2511-2 10.2 MAX. TOP VIEW 8 76 5 1. 2. 3. 4. 12 Anode Cathode Emitter Collector 1 1, 3. 2, 4. 5, 7. 6, 8. 234 Anode Cathode Emitter Collector 6.5 7.62 3.8 MAX. 2.8 4.55 MIN. MAX. 2.8 4.55 MIN. MAX. 3.8 MAX. 6.5 7.62 0.65 0.65 1.250.15 2.54 0.50 0.10 0.25 M 0 to 15 1.250.15 2.54 0.50 0.10 0.25 M 0 to 15 PS2511-4 20.3 MAX. TOP VIEW 16 15 14 13 12 11 10 9 7.62 2.8 4.55 MIN. MAX. 3.8 MAX. 12345678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9,11,13,15. Emitter 10,12,14,16. Collector 0.65 6.5 1.250.15 2.54 0.50 0.10 0.25 M 0 to 15 2 PS2511-1,-2,-4, PS2511L-1,-2,-4 Lead Bending Type (Gull-wing) PS2511L-1 TOP VIEW 43 PS2511L-4 TOP VIEW 16 15 14 13 1211 10 9 4.6 0.35 1. 2. 3. 4. 12 Anode Cathode Emitter Collector 20.3 MAX. 12345678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9,11,13,15. Emitter 10,12,14,16. Collector 6.5 6.5 0.05 to 0.2 7.62 3.8 MAX. 7.62 3.8 MAX. 1.250.15 0.25 M 2.54 0.90 0.25 9.60 0.4 1.250.15 0.25 M 2.54 0.90 0.25 9.60 0.4 PS2511L-1 TOP VIEW 43 PS2511L-2 TOP VIEW 8 76 5 5.1 MAX. 1. 2. 3. 4. 12 Anode Cathode Emitter Collector 10.2 MAX. 1 1, 3. 2, 4. 5, 7. 6, 8. 234 Anode Cathode Emitter Collector 6.5 6.5 0.05 to 0.2 7.62 3.8 MAX. 7.62 3.8 MAX. 1.250.15 0.25 M 2.54 0.90 0.25 9.60 0.4 1.250.15 0.25 M 2.54 0.90 0.25 9.60 0.4 PS2511L-4 TOP VIEW 16 15 14 13 12 11 10 9 20.3 MAX. 12345678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9,11,13,15. Emitter 10,12,14,16. Collector 6.5 7.62 3.8 MAX. 1.250.15 0.25 M 2.54 0.90 0.25 9.60 0.4 0.05 to 0.2 0.05 to 0.2 0.05 to 0.2 3 PS2511-1,-2,-4, PS2511L-1,-2,-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Symbol Ratings PS2511-1, PS2511L-1 Diode Reverse Voltage Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Unit PS2511-2,-4 PS2511L-2,-4 6 50 V mA 0.55 55 1 40 5 40 mW/C mW/ch A V V mA 1.2 120 mW/C mW/ch Vr.m.s. C C VR IF PD/C PD IFP VCEO VECO IC 0.7 70 Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation PC/C PC BV TA Tstg 1.5 150 5 000 -55 to +100 -55 to +150 Isolation Voltage *2 Operating Ambient Temperature Storage Temperature *1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output 4 PS2511-1,-2,-4, PS2511L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Coupled Collector to Emitter Dark Current Current Transfer Ratio *1 (IC/IF) Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 Symbol VF IR Ct ICEO CTR IF = 10 mA VR = 5 V Conditions MIN. TYP. 1.2 MAX. 1.4 5 Unit V A pF V = 0 V, f = 1.0 MHz VCE = 40 V, IF = 0 mA IF = 5 mA, VCE = 5 V 80 50 100 200 400 nA % VCE(sat) RI-O CI-O tr tf IF = 10 mA, IC = 2 mA VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 10 V, IC = 2 mA, RL = 100 10 11 0.3 V 0.5 3 5 pF s *2 *1 CTR rank (PS2511-1,PS2511L-1 only) D : 100 to 300 % *2 Test Circuit for Switching Time IF Pulse Input VCC PW = 100 s Duty Cycle = 1/10 In monitor 50 VOUT RL = 100 5 PS2511-1,-2,-4, PS2511L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 150 75 Diode Power Dissipation PD (mW) PS2511-1 PS2511L-1 50 PS2511-2 PS2511L-2 PS2511-4 PS2511L-4 0.7 mW/C 100 PS2511-2 PS2511L-2 PS2511-4 PS2511L-4 50 PS2511-1 PS2511L-1 1.5 mW/C 25 0.55 mW/C 1.2 mW/C 0 25 50 75 100 125 150 0 25 50 75 100 125 150 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 10 Collector Current IC (mA) Forward Current IF (mA) 40 50 mA TA = +100 C +60 C +25 C 30 1 0 C -25 C -50 C 20 mA 10 mA 20 5 mA 0.1 10 IF = 1 mA 0.01 0.0 0.5 1.0 1.5 2.0 0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 100 50 mA 20 mA 10 mA 5 mA 10 000 1 000 100 10 1 0.1 0.01 -50 Collector Current IC (mA) VCE = 80 V 40 V 25 V 10 V 5V 10 2 mA IF = 1 mA 1 -25 0 25 50 75 100 0.1 0.0 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA (C) Collector Saturation Voltage VCE(sat) (V) 6 PS2511-1,-2,-4, PS2511L-1,-2,-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio CTR 1.2 300 CURRENT TRANSFER RATIO vs. FORWARD CURRENT Current Transfer Ratio CTR (%) VCE = 5 V 250 200 150 100 50 0 0.01 1.0 0.8 0.6 0.4 0.2 0.0 Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V -50 -25 0 25 50 75 100 0.1 1 10 100 Ambient Temperature TA (C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 100 IC = 2 mA, VCC = 10 V, CTR = 220 % 10 td ts 1 tf tr 1 000 SWITCHING TIME vs. LOAD RESISTANCE IF = 5 mA, VCC = 5 V, CTR = 220 % tf Switching Time t ( s) Switching Time t ( s) 100 ts 10 tr td 1 0.1 10 100 1k 10 k 0.1 10 100 1k 10 k 100 k Load Resistance RL () Load Resistance RL () FREQUENCY RESPONSE IC = 1 mA, VCC = 5 V 1.2 LONG TERM CTR DEGRADATION IF = 5 mA (TYP.) 1.0 0 -5 -10 -15 RL = 1 k -20 300 0.5 1 2 5 10 20 50 100 200 500 CTR (Relative Value) Normalized Gain GV 0.8 TA = 25 C 0.6 0.4 0.2 0 TA = 60 C 100 102 103 Time (Hr) 104 105 Frequency f (kHz) Remark The graphs indicate nominal characteristics. 7 PS2511-1,-2,-4, PS2511L-1,-2,-4 TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.550.1 4.30.2 7.50.1 16.00.3 1.550.1 8.00.1 0.3 5.60.1 Tape Direction PS2511L-1-E3 PS2511L-1-F3 PS2511L-1-E4 PS2511L-1-F4 Outline and Dimensions (Reel) 2.00.5 13.00.5 PS2511L-1-E3, E4: 250 PS2511L-1-F3, F4: 330 R 1.0 21.00.8 80.05.0 10.30.1 16.4 +2.0 -0.0 Packing: PS2511L-1-E3, E4 1 000 pcs/reel PS2511L-1-F3, F4 2 000 pcs/reel 8 PS2511-1,-2,-4, PS2511L-1,-2,-4 Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.550.1 4.30.2 16.00.3 10.30.1 7.50.1 1.550.1 12.00.1 10.40.1 0.3 Tape Direction PS2511L-2-E3 PS2511L-2-E4 Outline and Dimensions (Reel) 2.00.5 13.00.5 R 1.0 21.00.8 80.05.0 330 16.4 +2.0 -0.0 Packing: 1 000 pcs/reel 9 PS2511-1,-2,-4, PS2511L-1,-2,-4 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature * Time of temperature higher than 210 C * Number of reflows * Flux 235 C (package surface temperature) 30 seconds or less Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 235 C (peak temperature) 210 C to 30 s 120 to 160 C 60 to 90 s (preheating) Time (s) Peak temperature 235 C or below (2) Dip soldering * Temperature * Time * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 PS2511-1,-2,-4, PS2511L-1,-2,-4 [MEMO] 11 PS2511-1,-2,-4, PS2511L-1,-2,-4 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEPOC is a trademark of NEC Corporation. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. M4 96. 5 |
Price & Availability of PS2511-1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |